AV无码波多野一级毛片,骚货使劲嗯,日本一区二区三区欧美激情

Welcome to the official website of Changshu Hongjia Fluoride Technology Co., Ltd!

You Are Here：Home> Product display >Fluoro coating/fluororesin

產(chǎn)品導(dǎo)航

PVDF T-2

PVDF T-2 is a powdery resin with high melt flow rate and low melt viscosity. It is a thermoplastic resin and can be used as a resin for fluorine-containing powder coatings.

PVDF T-2 PVDF Resin for Powder Coatings

1. Product Introduction

PVDF T-2 is a powdered vinylidene fluoride homopolymer with high melt mass flow rate and low melt viscosity, belonging to thermoplastic fluororesin. This resin is resistant to most chemical media and has excellent properties such as heat resistance, high mechanical strength, high wear resistance, UV resistance and radiation resistance. PVDF T-2 can be used as a resin for fluorine-containing powder coatings.

This vinylidene fluoride homopolymer starts to decompose slightly above 300℃, producing hydrogen fluoride gas.

2. Product Characteristics

Item	Unit	Specification	Test Standard
Appearance	/	Off-white powder	Visual inspection
Melt Mass Flow Rate	g/10min	18.0~45.0	ASTM D1238, GB/T 3682 (230℃,2.16kg)
Bulk Density	g/L	200~400	HG/T 2900
Melting Point	℃	164~172	ASTM D3418
Standard Relative Density	g/cm3	1.77~1.79	ASTM D792, GB/T 1033.1
Hardness	/	75~76	ASTM D2240, GB/T 2411
Moisture Content, ≤	%	≤0.1	Loss on drying method